Coaxial to 3.5mm Audio Converter – Digital to Analog DAC, USB Powered, with 1 m Coaxial Cable
Many TVs, set-top boxes, DVD players and consoles send sound out through a round digital coaxial socket, which older speakers, amplifiers and headphones cannot use.
Check compatibility
One way only: digital coaxial in, analogue 3.5mm out
USB powered – plug the USB lead into the TV's USB port or any USB charger (charger not included)
You’ll also need
In the pack: 1 × coaxial to 3.5mm digital to analog converter (USB power lead and 3.5mm output lead attached) and 1 × 1 m digital coaxial cable. Supplied without retail box. USB charger, TV and listening devices are not included.
Key product details
- Turns a digital coaxial audio output into an analogue 3.5mm stereo plug – for TVs, set-top boxes, DVD players and consoles with a coaxial digital out socket
- 3.5mm plug goes straight into headphones, powered speakers, an amplifier's AUX input or a soundbar's AUX input
- Includes a 1 m digital coaxial cable (yellow RCA-type plugs) – plug and play, no drivers or settings on the converter
- Set your TV's digital audio output to PCM / Stereo – 2-channel only; it does not decode Dolby Digital or DTS surround
About this item
This small converter takes that digital coaxial signal and turns it into ordinary analogue stereo on a 3.5mm plug.
How to connect: run the included coaxial cable from the source device's digital COAXIAL OUT socket (usually orange or marked “Coaxial” or “Digital Audio Out”) to the converter, plug the converter's USB lead into a USB port for power, then plug its 3.5mm lead into your headphones, powered speakers, or the AUX input of an amplifier or soundbar. Use a 3.5mm-to-RCA lead (not included) for equipment with red and white inputs.
Please check: the converter's input is a digital coaxial input. It does not take ordinary red and white analogue audio or yellow composite video, even though the included cable has yellow plugs. It does not have an optical input – we sell an optical version separately.
Important – TV audio setting: in the TV's sound or digital audio output menu choose PCM (sometimes called Stereo). The converter handles 2-channel PCM audio. It does not decode Dolby Digital or DTS surround, so if the TV is set to Auto, Bitstream, Dolby or DTS you may get no sound. Volume is controlled on the TV or on the speakers/headphones, depending on the TV.