2-Way Digital Audio Converter | Optical to Coaxial & Coaxial to Optical, USB Powered

SKU:
COAX-TOS-CONV
$18.95
Write a Review
Current Stock:
Adding to cart… The item has been added
Save when you buy more
Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 - 4 and pay only $18.45 each
  • Buy 5 - 9 and pay only $17.95 each
  • Buy 10 - 1000 and pay only $17.45 each
★99.9% positive from 96,505 eBay ratings · Australian seller since 2001
🚚Same-day dispatch on orders before 2pm AEST
✓12-month warranty · 30-day returns · ships from the Gold Coast

2-Way Digital Audio Converter – Optical to Coaxial and Coaxial to Optical, USB Powered

Digital audio comes out of TVs, set-top boxes and players on one of two sockets: a square optical (Toslink) socket or a round digital coaxial socket.

Check compatibility

USB powered – micro-USB power cable included; power it from a TV USB port or any 5V USB charger (charger not included)

You’ll also need

In the pack: 1 × two-way digital audio converter and 1 × USB to micro-USB power cable. Optical and coaxial audio cables and the USB charger are not included.

Key product details

  • Two-way digital converter – optical (Toslink) to coaxial, coaxial to optical, or a straight-through digital repeater
  • Input selector switch – pick the coaxial or the optical input; both outputs carry it at the same time
  • Joins a TV, set-top box or player with only one type of digital audio output to an amplifier, receiver or soundbar with the other type of digital input
  • Small black metal case with a red power light
  • Digital to digital only – no analogue output and no headphone socket

About this item

If your sound system only has the other kind of input, this converter joins them.

Plug the source into the matching input, slide the selector switch to that input, and connect your amplifier, receiver or soundbar to either output – the optical and coaxial outputs both carry the signal at the same time.

How to connect: source device digital OUT → converter INPUT (coaxial or optical, set the switch to match) → converter OUTPUT (optical or coaxial) → the digital input on your amplifier, receiver or soundbar. Power it with the included micro-USB cable from a TV USB port or a 5V USB charger. The red light shows it is powered.

Please check: this is a digital to digital converter. It passes the digital audio through unchanged and does not decode surround sound or convert it to analogue – it has no red and white outputs and no headphone socket, so it cannot drive ordinary speakers or headphones. Your receiving equipment must support the audio format the source is sending (set the source to PCM / Stereo if in doubt). For headphones or analogue speakers, see our optical and coaxial to 3.5mm converters instead.

12-month warranty

If you need technical support or encounter a problem with your purchase, contact us and we'll help.

We also offer 30-day returns. See our Shipping & Returns policy for the return process and conditions.