HDMI ARC Audio Extractor – TV Sound to Optical, Coaxial, RCA and 3.5mm Headphone Outputs
Many TVs send their sound out only through an HDMI port marked ARC.
Check compatibility
USB powered – USB-C power cable included; power it from a TV USB port or any 5V USB charger (charger not included)
Audio only – it does not pass a picture. HDMI cable not included
You’ll also need
In the pack: 1 × HDMI ARC audio extractor and 1 × USB-A to USB-C power cable. HDMI cable, audio cables and USB charger are not included.
Key product details
- Gets the sound out of your TV's HDMI ARC port – or from an optical or coaxial digital source, chosen with the 3-way input switch
- Four outputs at once: optical, coaxial, red/white RCA stereo and a 3.5mm headphone/AUX jack
- Connect older amplifiers, powered speakers, soundbars or headphones to a TV that has no other suitable audio output
- Set your TV's audio output to PCM for the RCA and 3.5mm outputs (2-channel stereo); the optical and coaxial outputs pass the digital sound through
About this item
This extractor connects to that port and gives you four audio outputs at the same time: optical, coaxial, red and white RCA stereo, and a 3.5mm jack for headphones or an AUX input.
It can also take a coaxial or optical digital source instead of ARC – choose the input with the 3-way switch.
How to connect: run an HDMI cable (not included) from the TV's HDMI port labelled ARC to the extractor's ARC input, set the switch to ARC, and power it with the included USB-C cable from a TV USB port or a 5V USB charger. Then connect your amplifier, receiver, soundbar, powered speakers or headphones to the output you need.
Important – TV settings: use the HDMI port marked ARC and turn on ARC / HDMI-CEC (sometimes called Anynet+, SimpLink, Bravia Sync or similar) in the TV's settings. For the RCA and 3.5mm outputs set the TV's audio output to PCM; those outputs are 2-channel stereo and do not decode surround formats. The optical and coaxial outputs pass the digital sound through for equipment that accepts it. The input switch selects the source – it is not a power switch.
Please check: this is an audio-only device for HDMI ARC (not eARC-specific) – it does not pass video, so your picture stays on the TV.