Xbox One 220W Power Supply Brick with LED Status Display — 12V 17.9A, AU Mains Lead Included
This is the 220W upgrade brick for the original Xbox One, with a status LED set into the top panel. The LED tells you what the supply is doing at a glance: it sits green while the console is in standby and turns red once the console is switched on and drawing power. If the light is off or blinking, the unit is reporting a fault. That is genuinely useful on a console that lives in a cabinet — you can see the supply state without reaching round the back.
Check compatibility
Original Xbox One Only — Important Compatibility Note: this brick suits the original launch-model Xbox One, the console that uses an external power supply. The Xbox One S and Xbox One X have their power supplies built in and take no external brick at all, so this will not fit those consoles. If you are unsure which console you have, check whether there is a separate brick on your existing power lead before ordering.
Check these alternatives
Have an Xbox One S/X or Series S/X instead? Those use internal supplies; see our figure-8 mains lead. Check the matching C7 inlet and console voltage. This is an alternative for those models, not an add-on to the original Xbox One brick.
Choose only what your setup needs. Linked items are sold separately.
Key product details
- Status LED on the top panel — green in standby, red once the console is switched on
- Full 220W output — DC 12V at 17.9A plus a 5V 1A standby rail
- Auto-switching 100–240V AC input, 47–63Hz — suits PAL and imported consoles alike
- Earthed 3-pin AU kettle-style mains lead included — straight into any 240V wall socket
- Fan cooled with a vented housing — heat is moved out of the unit, not just radiated
- Fits all original Xbox One consoles — not the Xbox One S or Xbox One X
About this item
Full 220W, not a 135W substitute: the output is DC 12V at 17.9A with a separate 5V 1A standby rail, which is the rating the original Xbox One was designed around. Many replacement bricks on the market are 135W (12V 10.83A) units; they will run the console, but this one carries the full headroom. The wide 100–240V auto-switching input means it works with Australian consoles and imports alike.
Ready for an Australian socket: an earthed 3-pin AU kettle-style mains lead is included, so it plugs straight into a standard 240V outlet with no adaptors or converters required. Backed by a 12-month warranty.
