3.5mm 4-Pole to 3 RCA AV Cable 1.5 m – Composite Video + Stereo Audio, Tip-Video Wiring
This 1.5 m AV lead splits a 3.5mm 4-pole AV output into composite video and stereo audio.
Check compatibility
Not for Raspberry Pi, iPod, camcorders or Xbox 360 E – those put ground on a ring
Not suitable for: Raspberry Pi, Apple iPod, camcorders or the Xbox 360 E. These put ground on a ring rather than the sleeve, and swapping plugs cannot fix that. This is not a stereo aux or headphone lead – for car or speaker audio, choose a 3-pole 3.5mm audio cable. Standard-definition composite video only.
You’ll also need
In the pack: 1 × 3.5mm 4-pole to 3 RCA AV cable, 1.5 m, grey, gold-plated plugs. Devices shown are not included.
Key product details
- 3.5mm 4-pole (TRRS) plug to 3 × RCA plugs, 1.5 m – grey cable, gold-plated plugs
- Wiring: tip = yellow (video), ring 1 = white (left audio), ring 2 = red (right audio), sleeve = ground
- Matches the AV output of WD TV Live media players
- For devices whose 3.5mm AV OUT socket has ground on the sleeve, into the yellow/white/red AV inputs of a TV or projector
- Sound but no picture? Swap the RCA plugs around at the TV
About this item
Plug the 3.5mm end into your device's AV OUT socket and the yellow, white and red plugs into the matching AV inputs on your TV or projector.
Wiring – please check before buying: 3.5mm AV sockets are not wired the same way on every device. This lead is wired tip = yellow (composite video), ring 1 = white (left audio), ring 2 = red (right audio), sleeve = ground. It matches the AV output of WD TV Live media players. Other media players and TV boxes that also put ground on the sleeve can work too, but may need the RCA plugs swapped around at the TV – if you get sound but no picture, swap the plugs until the picture appears.
