Orange Left-Angle IEC C13 Power Lead – 2 m, Clear Plugs, Australian 3-Pin Plug
This orange 2 metre power lead connects equipment with a standard 3-pin IEC C14 power inlet to an Australian power point.
Check compatibility
Which way the lead runs – please check: looking at your device's C14 inlet with the earth pin at the top, the lead runs to the left. If your inlet is mounted upside down or sideways, rotate the angle guide picture to match your inlet before ordering. The Australian wall plug end is straight.
Compatibility – please check your inlet: the C13 socket fits the common 3-pin IEC C14 inlet used on desktop PCs, monitors, printers, TVs, amplifiers, AV receivers and other mains equipment. It does not fit the notched C15 hot-appliance inlet, the two-pin figure-8 (C7) inlet or the three-lobe cloverleaf (C5) inlet.
Key product details
- Australian compliant & approved – RCM compliance mark on the plug, approved for Australian 240V mains
- 2.0 m orange mains lead – Australian 3-pin 10A 250V wall plug to a left-angled IEC C13 socket
- Left angle – facing your device's C14 inlet with the earth pin at the top, the lead runs to the left
- Clear moulded plugs – the coloured wires inside are visible, so you can see the connections at a glance
- 1mm² multistrand copper conductors in flexible H05VV-F cable
- Fits equipment with a 3-pin IEC C14 power inlet – PCs, monitors, printers, TVs, amplifiers and more
About this item
The angled C13 lets the lead run flat along the back of the equipment instead of sticking straight out, and the clear moulded plugs let you see the coloured wires inside.
Specifications: length 2.0 m; Australian 3-pin plug (straight), 10A 250V; IEC C13 socket, left-angled; H05VV-F cable with 1mm² multistrand copper conductors; orange cable with clear plugs.
In the pack: 1 × orange 2 m left-angle IEC C13 power lead. No other accessories are included.
